3D Module
The tab is used to configure 3D settings 3D. The tab is available with a license for 3D.
- Common settings
- 2D views
- Pseudo section properties
Common settings
Automatically project edges on sketch
The parameter when adding a new sketch adjusts the display of the projection of the edges of a flat face taken as the working plane for the sketch.
Call command “Add planar sketch”.
Specify a flat face as a work plane.
Automatically correct UCS while editing block references with 2D constraints
Automatic correction of UCS when editing a block reference with 2D constraints.
Restory viewport’s camera while exiting 2D sketch editing mode
If enabled, the view camera will be in position before the sketch is edited.
Edit parametric constraint value upon creation
Controls whether the dependency editing dialog is opened immediately after installation.
Associativity for new bodies
The enabled option allows you to build fixed bodies without the possibility of defixation. The sketch must be attached to some plane.
Layer for sketches
It allows you to customize the name of the layer on which will be placed flat sketches.
Layer for working objects
It allows you to customize the name of the layer on which the objects will be located.
Layer for sections
It allows you to customize the name of the layer on which section will be located.
Layer for parametric 3D solids
Allows you to set the name of the layer on which the parametric 3D bodies will be located.
Show/no thread helix
Controls the display of the thread helix.
Thread helix color
Thread helix color.
Thread face color
Thread face color.
Mass display accuracy
Mass display accuracy for inspector properties and part and assembly unit properties.
2D views
Automatic update
Sets the update mode 2D views
Layer
It defines the layer which will be located 2D views
Visible lines
Show on sections
Adjusts the image visible lines on sections
Line color
Specifies the color of visible lines
Linetype
Specify the type of visible lines
Lineweight
It determines the weight of visible lines
Hidden lines
Show on sections
It adjusts the display of invisible lines on 2D views
Line color
Specifies the color of hidden lines
Linetype
Specify the type of hidden lines
Lineweight
It determines the weight of invisible lines
Section border
Settings differ from visible
It determines whether the parameters are different boundary lines of the section visible lines If not, the next line settings are not valid.
Line color
Specifies the color of the boundary line section
Linetype
Specifies the type of the boundary line section
Lineweight
It determines the weight of the boundary line section
Hatch
Show
It controls the display of hatching
Face hatch
Settings such as shading
3D. Pseudo section properties
Hatch
Show
It controls the display of hatching.
Face hatch
Settings such as shading.
Surface transparency
Settings such as shading. Default 0 – full transparency.
3D History
Expand parts with errors – expands branches of parts that have errors.
Collapse parts – collapses all expanded branches in the tree.
Update model with regen(3drebuild) – rebuild model.
!https://manula.r.sizr.io/large/user/13178/img/3d-m373.png
Post your comment on this topic.